Side Clamp NU10

Application Examples: Milling and Drilling

• Clamping pressure up to 20 kN
• Ideal for machining small components. Sits inside the machine table.
• Sturdy and Reliable
• Bolt Size: 8mm to 24mm

NU10 Specifications

Side Clamp FL10

Application Examples: Milling and Drilling

• Clamping pressure up to 40 kN
• Ideal for clamping flat components.
• Low profile side clamp
• Bolt Size: 6mm to 20mm

FL10 Specifications & Spare Parts

Side Clamp FL10
with Long T-Nut

Application Examples: Milling and Drilling

• Clamping pressure up to 40 kN
• Ideal for clamping flat components.
• Low profile side clamp
• Bolt Size: 6mm to 20mm

FL10 with Long T-Nut Specifications & Spare Parts

Side Clamp SK10

Application Examples: Milling and Drilling

• *Older design
• Clamping pressure up to 50 kN
• Side clamping of work - piece to allow for free surface machining.
• Can be used parallel to the T-Slot.
• Bolt Size: 10mm to 24mm
• LIMITED QUANTITIES AVAILABLE

SK10 Specifications & Spare Parts

Side Clamp SK10

Application Examples: Milling and Drilling

• Inclined fixing set.
• Clamping pressure up to 65 kN
• Side clamping of work - piece to allow for free surface machining.
• Can be used parallel to the T-Slot.
• Bolt Size: 8mm to 24mm

SK10 Specifications & Spare Parts

Side Clamp SK10-5

Application Examples: Milling and Drilling

• With elongated slot.
• Clamping pressure up to 40 kN
• Side clamping of work - piece to allow for free surface machining.
• Can be used parallel to the T-Slot.
• Bolt Size: 8mm to 24mm

SK10-5 Specifications & Spare Parts

Side Clamp SKQ10

Application Examples: Milling and Drilling

• *Older design
• Clamping pressure up to 50 kN
• Side clamping of work - piece to allow for free surface machining.
• Can be used parallel or at an angle to the T-Slot.
• Bolt Size: 10mm to 24mm
• LIMITED QUANTITIES AVAILABLE

SKQ10 Specifications & Spare Parts

Side Clamp SKQ10

Application Examples: Milling and Drilling

• Inclined fixing set.
• Clamping pressure up to 65 kN
• Side clamping of work - piece to allow for free surface machining.
• Can be used parallel or at an angle to the T-Slot.
• Bolt Size: 8mm to 24mm

SKQ10 Specifications & Spare Parts

Side Clamp SKQ10-5

Application Examples: Milling and Drilling

• With elongated slot.
• Clamping pressure up to 40 kN
• Side clamping of work - piece to allow for free surface machining.
• Can be used parallel to the T-Slot.
• Bolt Size: 8mm to 24mm

SKQ10-5 Specifications & Spare Parts

Self Centering Clamp

Application Examples: Milling and Drilling

• Opening Size from 0mm to 210mm
• Base plate with 13mm & 17mm centered holes
• Interchangeable Jaws
• Centering accuracy is 0.04mm
• Hole Size: 10mm to 16mm

Self Centering Clamp Specifications & Spare Parts