*** SIDE CLAMPS ***

Side Clamps - Inch

*** SIDE CLAMP NU10 ***

Side Clamp NU10

Application Examples: Milling and Drilling

  • Clamping pressure up to 4,400 lbs-force
  • Ideal for machining small components. Sits inside the machine table.
  • Sturdy and Reliable
  • Bolt Size: 8mm to 24mm

CURRENTLY AVAILABLE IN METRIC SIZES ONLY


*** SIDE CLAMP FL10 ***

Side Clamp FL10

Application Examples: Milling and Drilling

  • Clamping pressure up to 8,9000 lbs-force
  • Ideal for clamping flat components.
  • Low profile side clamp
  • Bolt Size: 6mm to 20mm

CURRENTLY AVAILABLE IN METRIC SIZES ONLY


*** SIDE CLAMP FL10 WITH LONG T-NUT ***

Side Clamp FL10
with Long T-Nut

Application Examples: Milling and Drilling

  • Clamping pressure up to 8,900 lbs-force
  • Ideal for clamping flat components.
  • Low profile side clamp
  • Bolt Size: 6mm to 20mm

CURRENTLY AVAILABLE IN METRIC SIZES ONLY


*** SIDE CLAMP SK10-OLD ***

Side Clamp SK10

Application Examples: Milling and Drilling

  • *Older design
  • Clamping pressure up to 11,200 lbs-force
  • Side clamping of work - piece to allow for free surface machining.
  • Can be used parallel to the T-Slot.
  • Bolt Size: 3/8in to 7/8in
  • LIMITED QUANTITIES AVAILABLE

SK10 Specifications & Spare Parts


*** SIDE CLAMP SK10 ***

Side Clamp SK10

Application Examples: Milling and Drilling

  • Inclined fixing set
  • Clamping pressure up to 14,500 lbs-force
  • Side clamping of work - piece to allow for free surface machining.
  • Can be used parallel to the T-Slot.
  • Bolt Size: 1/4in to 7/8in

SK10 Specifications & Spare Parts


*** SIDE CLAMP SK10-5 ***

Side Clamp SK10-5

Application Examples: Milling and Drilling

  • With elongated slot.
  • Clamping pressure up to 8,900 lbs-force
  • Side clamping of work - piece to allow for free surface machining.
  • Can be used parallel to the T-Slot.
  • Bolt Size: 1/4in to 7/8in

SK10-5 Specifications & Spare Parts


*** SIDE CLAMP SKQ10-OLD ***

Side Clamp SKQ10

Application Examples: Milling and Drilling

  • *Older design
  • Clamping pressure up to 11,200 lbs-force
  • Side clamping of work - piece to allow for free surface machining.
  • Can be used parallel or at an angle to the T-Slot.
  • Bolt Size: 1/4in to 7/8in
  • LIMITED QUANTITIES AVAILABLE

SKQ10 Specifications & Spare Parts


*** SIDE CLAMP SKQ10 ***

Side Clamp SKQ10

Application Examples: Milling and Drilling

  • Inclined fixing set.
  • Clamping pressure up to 14,500 lbs-force
  • Side clamping of work - piece to allow for free surface machining.
  • Can be used parallel or at an angle to the T-Slot.
  • Bolt Size: 1/4in to 7/8in

SKQ10 Specifications & Spare Parts


*** SIDE CLAMP SKQ10-5 ***

Side Clamp SKQ10-5

Application Examples: Milling and Drilling

  • With elongated slot.
  • Clamping pressure up to 8,900 lbs-force
  • Side clamping of work - piece to allow for free surface machining.
  • Can be used parallel to the T-Slot.
  • Bolt Size: 1/4in to 7/8in

SKQ10-5 Specifications & Spare Parts


*** SELF CENTERING CLAMP ***

Self Centering Clamp

Application Examples: Milling and Drilling

  • Opening Size from 0in to 8.27in
  • Base plate with 13mm & 17mm centered holes
  • Interchangeable Jaws
  • Centering accuracy is 0.0016in
  • Hole Size: 3/8in to 5/8in

Self Centering Clamp Specifications & Spare Parts